Thứ Hai, 13 tháng 8, 2012

Bihl-Wiedemann Vietnam Distributor-BWU1647

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong
D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh
Tell : 0915.980.479
        0162.999.888.7

Drive solutions

AS-i makes full use of all its strengths in material handling technology. The motor modules for roller drives from Bihl+Wiedemann allow 24V motors to be controlled directly through AS-i without the need for an additional control device. The speed of any driven roller can be varied from a central location. Our modules also make it possible to make use of the braking energy of the rollers in the system. Inputs on the modules are used to read in signals from sensors installed along the conveyor line.

In addition to motor modules for roller drives, Bihl+Wiedemann also provides drive solutions for remotely controlling AC motors (with or without frequency inverters) – an essential prerequisite for implementing new system structures.

System description

  • BWU1647
    BWU1647 | Cylindrical AS-i Actuator 1I/3O
    AB slave (up to 62 slaves)
  • BWU2038
    BWU2038 | AS-i Slave for SEW frequency inverters
    With M12 sockets, protection category IP65
    The substructure module is not included in the scope of delivery.
  • BWU2437
    BWU2437 | AS-i 3.0 Motor Modules
    4I/4O Module for MOVI-SWITCH
    The substructure module is not included in the scope of delivery.
  • BWU2767
    BWU2767 | Digital module AS-i, IP67, M12
    4I/2O Module suitable for MOVI-SWITCH
    The substructure module is not included in the scope of delivery.
  • BWU2398
    BWU2398 | AS-i 3.0 Motor Modules for 2 Roller Drives
    Speed setting of AS-i parameter, for each two Interroll motors EC200 or EC300 and Rollex (Roller Drives type 840).

    The motor module is designed to supply the 24V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged. The cable protection should be realized outside the motor module with additional measures.

    The substructure module is not included in the scope of delivery.
  • BWU2575
    BWU2575 | AS-i 3.0 Motor Modules for 2 Roller Drives
    Speed setting of AS-i parameter, for each two Interroll motors EC310.

    The motor module is designed to supply the 24V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged. The cable protection should be realized outside the motor module with additional measures.

    The substructure module is not included in the scope of delivery.
  • BWU2765
    BWU2765 | AS-i 3.0 Motor Modules for 2 Roller Drives
    AS-i 3.0 4I/4O module for two two Interroll motors EC310.

    In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor. After blowing the fuse the module is no longer functional and needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

    The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without short circuit the robust behavior of the module remains.

    The substructure module is not included in the scope of delivery.
  • BWU2715
    BWU2715 | AS-i 3.0 Motor Modules for 2 Roller Drives
    Speed setting of AS-i parameter, for each two Itoh Denki Motors Serie 50XE/XP.

    In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor. After blowing the fuse the module is no longer functional and needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

    The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without shortcut the robust behavior of the module remains.

    The substructure module is not included in the scope of delivery.
  • BWU2478
    BWU2478 | AS-i 3.0 Motor module for two motors
    AS-i module for two motors e.g. Interroll (EC200, EC300 or EC310) or
    Itoh Denki Serie 50XE/XP - POWER MOLLER® BRUSHLESS 24V DC.

    The motor module is designed to supply the 24V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged. The cable protection should be realized outside the motor module with additional measures.

    The substructure module is not included in the scope of delivery.
  • BWU2766
    BWU2766 | AS-i 3.0 Motor Modules for two motors
    AS-i module for two motors, e.g. Interroll (EC200, EC300 or EC310) or
    Itoh Denki series 50XE/XP - POWER MOLLER® BRUSHLESS 24VDC.

    In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor. After blowing the fuse the module is no longer functional and needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

    The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without shortcut the robust behavior of the module remains.


    The substructure module is not included in the scope of delivery.